Re: ProTerm 1.7 and 14.4 modems?

[kgagne@iii1.iii.net (Ken Gagne)]

Matthew Pearce (mpearce@crl.com) wrote:
: Ron Kneusel (rkneusel@post.its.mcw.edu) wrote:

: : I borrowed a 14.4 modem and hooked it up to my
: : trusty IIe. Ran ProTerm 1.7 and set the baud
: : to 19200.  I called a place I know connects at
: : 14.4 and I connected at 2400.  So I lowered the
: : baud rate in ProTerm to 9600 and tried again,
: : still connected at 2400.

: Are you sure that both modems are compatible at 14.4?  If one uses the 
: HFS standard & the other one uses the 'V dot' standard they will not 
: connect at 14.4 regardless of the software.

: M.P.

: -- 
: "I will not buy this tobacconist.  It is scratched."

Don't think modems can be formatted for Macs... You mean HST standard?

-Ken
look! no sig!