Re: Ramfast/ Transwarp II Problems

[sebugg@presby.edu (Stephen Buggie)]

In article <3qe2sq$498@coyote.csusm.edu>,
Tony Diaz <tdiaz@coyote.csusm.edu> wrote:
>Chet Gerhardt (gerhardt@global.california.com) wrote:
>> Have you heard of anyone having Ramfast problems with a Transwarp II?
>
>> I can't get these two cards to work together in my IIe. Right now I have a
>> platinum IIe, 1.5 Meg, Transwarp II and the Ramfast (2.01).  The only problem
>> is that I cannot get both the Ramfast and the Transwarp II to work together.
>> All is configured correctly, DMA is off.  I keep getting odd errors statements
>
>Which RAMFast? (Rev C or D)
>
>I have used a Rev D RAMFast in my //e, equipped with a Transwarp II and had
>no problems. The major difference is I have a 65802 on the Transwarp II.
>
>I have a Vulcan 20 installed now as I figured I'd use the RAMfast in a IIgs.
>
>The computer is as follows:
>
>Apple //e 1982 Rev B board with Enhanced ROMs on it
>3 Meg RAM
>S1 Networking Card
>S2 SSC
>S3 Transwarp II
>S4 Phasor
>S5 FDHD Card
>S6 Switch-a-slot w/OKS Multicache, SlotBuster I/O, or Disk II Card selectable
>S7 Vulcan 20
>
>The RAMFast Rev D worked fine before the Vulcan was added and this was on an
>original Apple power supply too.
>
>--
>  tdiaz@coyote.csusm.edu  --  Now Showing:  Second Sight on a IIgs near you!



WOW ---- That must be the finest set-up IIe system ever put together!
May IIgs owners dont have the deluxe accessories listed here......

I have searched for a OKS Multi-Cache card and also for an AE Transwarp IIe
II
and have never found them....




   **=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=**
   ** S. Buggie  sebugg@presby.edu   AIIgs/c/e   (803) 833-8337, 833-1632 **
   **=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=**
.