Re: Need Help with PCT Control Panel

[dempson@atlantis.actrix.gen.nz (David Empson)]

In article <3il3eb$54s@news.nevada.edu>,
Master of Cyberspace <lovett@nevada.edu> wrote:
> High Everyone,

'Low to you too.  :-)

> I have just recently installed a PCT 2.0 in slot 5 of a IIGS,

I assume you mean a PC Transporter running version 2.0 of the software.

> I have attached a IIGS 3.5" floppy drive to the PCT version 2.0,  
> but when I try to go into the PCT control panel it locks up after 
> bringing up the control panels option screen.

How are you getting to the PCT Control Panel?  You can either press
the space bar when the PCT's title screen is displayed, or you can
press Shift-Caps Lock-Caps Lock.

Does it lock up on the first screen (with five options listed,
including rebooting the PCT, quitting and returning to the PCT), or at
a later stage?

> This IIGS is a ROM 01, with 5 megs ram, 2 scsi Hard drives with an
> Apple SCSI Rev A card.

I assume you mean an original Apple SCSI card.  I hope it isn't
using revision A of the ROM.  Revision A is labelled "341-0112A".  You
should be running revision C, which is "341-0437-A".


By the way - your signature is a little excessive.
-- 
David Empson
dempson@actrix.gen.nz
Snail mail: P.O. Box 27-103, Wellington, New Zealand