Re: Super Serial Card help needed

[venom@nudge.io.org (Robert Tate)]

rheinze@lrc.edu wrote:
: Can someone help me with the dip switches on the Super Serial card.

: I cannot find the manual.   I am using a 1200 baud modem and AE Pro
: software.   I might move to 2400 baud.

: I can't get connected and I know the problem is with the SS card.

: Can't get through with IN#2 or PR#2 either.

: So any help with the SS card switches would be appreciated.

: Please e-mail
: Thanks

Okay, let's see if I can help.  I'm looking at the manual right now.

First off, how do you know the problem is with the card?  Are you sure 
the software works?  What about the modem?

If you're sure, then read on.  I'll describe how to connect a 1200 baud 
modem as shown in the manual.

First, since the card is capable of being used as a printer (or 
whatever) card as well, look on the card and you'll see a chip with a 
triangle on it, it should be pointed towards MODEM.  Switch settings for 
a 1200bps modem are as follows:

BANK #1                         BANK#2

1-1 1-2 1-3 1-4 1-5 1-6 1-7     2-1 2-2 2-3 2-4 2-5 2-6 2-7
OFF ON  ON  ON  ON  ON  ON      ON  ON  ON  ON  OFF OFF OFF

I think I have an extra copy of the manual, so if you want (as long as I 
<do>), I can send you the extra.

Btw, I have not given any explanations for these settings, since this 
would end up being a fairly long message and I'm not the greatest typist 
in the world, but these are the standard as listed.

Hope this helps,
                 Rob.

--
     ____________________________  ////  ______________________________
    |                             |--00                                |
    | Apple // Forever!!!!!!      C   ^        venom@io.org            |
    |                              \ ~/        robert.tate@canrem.com  |
    |__________________________________________________________________|