Re: Help with proterm 3.1 zoom v.32 trubo modem!!!!

[JB3819@JB3819.SBC.COM]

In article <3dnnok$s5d@lastactionhero.rs.itd.umich.edu>, <teke@umich.edu> 
writes:

> I have three questions for someone using proterm with a Zoom v.32 Turbo
> Modem.
>  
> 1.)  What are the proper SSC Dip Setting to use with the modem and
>      an enhanced IIe?
>  
> 2.)  What is the proper driver to select under Proterm 3.1?  Under
>      PT 3.0 I was able to select a driver for the zoom 9600 turbo.
>      This driver is not available under 3.1.  Using a PT update I
>      was able to add this to my old version of 3.0.  I added the
>      driver to pt3.1 's directory and it did not add it to the list.
>  
> 3.)  Where can I get a hardware handshaking cable for my IIe?  I need
>      a configuration with DB-25 on both ends or some type of conversion.
>  
>  
> Any help anyone can offer on these three would be greatly appreciated!
>  
> Teke
>  
> HEY!  For the best Apple II base BBS in the Country Call Data Base II
>         (703) 323-5840
>  

Can't help with 1 or 2.  The answer to #3 is, I think, just about any store 
that sells / supports the MAC.  I have heard it called the "high-speed modem 
cable".  I think it moves the DRS pin on the MAC to the CTS pin on the modem, 
but I'm not sure.  Whatever it does, it allows the modem to tell the computer 
via hardware whether or not it is ready.