Re: Doom Conversion (was Dragons Lair

[bazyar@netcom.com (Jawaid Bazyar)]

dempson@atlantis.actrix.gen.nz (David Empson) writes:

>In a ROM 1 IIgs, you can only put these cards in slot 3.  They need
>the "M2B0" signal, which indicates whether main or auxiliary memory is
>being accessed.  This signal goes to all slots in a ROM 3 (possibly
>excluding slot 7?  My manuals are at home just now).

>You could run a wire from the appropriate pin of slot 3 to the card if
>you had it in another slot.

  Or better, from the appropriate pin of slot 3 to the appropriate
pin of slot X.

-- 
 Jawaid Bazyar              |   Like UNIX? Like your Apple IIGS? Then ask
 Procyon, Inc.              |   me about GNO/ME for the Apple IIgs!   
 bazyar@netcom.com          |   P.O Box 620334
 --Apple II Forever!--      |   Littleton, CO 80162-0334   (303) 781-3273