Re: Titan Accel-//e info

[BRIAN.HAMMACK@rook.wa.com (brian hammack)]

 Wulf Hofbauer shouted as my whip tasted warm flesh:

 WH| This card is a 3.5 (3.58?) MHz 65c02 based accelerator with it's
   | own RAM. It doesn't make the machine an "enhanced //e" because it

Wait, contradiction here.  If it's got a 65c02, it's enhanced!  (Never
mind the other three chips that finish the job?)  Thanks for the speed
rating.  Next question, as you mentioned, are the softswitches.  How do
I drop it down to 1mHz (as some programs desire/require)?

>     On the top of the card is a bank of 8 dipswitches and to the right
>of that (over a couple chips) is a group of 7 jumpers -- well, six and
>the second pair of pins is open -- and I want to know what these do.
 WH| The DIP switches should set the processor speed during accesses
   | I don't know about the jumpers, maybe I can look it up.

Please do.  All the info on how to get the card to realize more than
128k in slot 0 (and I haven't tried it yet) you can give is welcome.

 WH| I doubt you can accelerate more than the standard 128K of RAM, but
   | frankly, I don't know. The card won't conflict with the standard
   | processor, the motherboard chip is halted by using the DMA line.

Dunno and haven't tried.  And I'm glad to hear there's no conflict!

Thanks for the info; I'll take any more info you can muster.  :)

       _________________________________________________________
 _____(                                                         )_____
 \ _  | mushroom@prostar.com  #7@#24  brian.hammack@rook.wa.com |  _ /
  >_  (_________________________________________________________)  _<
 /_______)                                                   (_______\

 * 2qwk! 1.26b2 * Wasting time is an important part of living.