[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: RAMFast, Slot 7, Appletalk?
- Subject: Re: RAMFast, Slot 7, Appletalk?
- From: gdunn@nyx10.cs.du.edu (Greg Dunn)
- Date: 12 Oct 1994 15:42:32 -0600
- Keywords: RAMFast IIgs ROM 01 Appletalk SCSI
- Newsgroups: comp.sys.apple2
- Organization: University of Denver, Math/CS Dept.
- References: <37guhj$k3t@nyx10.cs.du.edu> <37he1i$7r5@gap.cco.caltech.edu>
Thanks, both. I figured that was what I'd have to do. I'm still a
little unclear on ProDOS slot mapping. Since I _do_ have 5.25"
drives (a DuoDisk), but connected to a SmartPort, am I prohibited from
setting slot 6 to "your card" and putting RF in that slot? I would
assume so...
So it looks like Slot 1, and print through AppleTalk (I have a
LaserWriter NTR, no problem)? I figured out the AT* file thing,
but you can also use the Installer to "Remove" AT and that also
appears to work.
--
| Greg Dunn | "Information is not knowledge; |
| Greg@gdunn.nawc-ad-indy.navy.mil | knowledge is not wisdom; |
| 72447.1310@compuserve.com | wisdom is not truth." |
| GregDunn@aol.com | Frank Zappa |