Re: Post Your ZipGS Info Here!

[handel@lars.acc.stolaf.edu (Peter F Handel)]

In article <35q6ev$cmv@reeve.research.aa.wl.com> schultp@aa.wl.com 
  (Paul Schultz) writes:

>Perhaps if enough people post we can get some sort of consensus.

>------
>I'll start:
>
>ZipGS 1.0.2, 10.5 MHz 65816-E, 64K SONY wide 35ns SRAMS.
>
>Paul Schultz
>
>--
>===============================
>Internet: schultp@aa.wl.com
>===============================

Here's the right answer: (Thanks Gabe!)

>>70ns which is the right speed for only 10Mhz.  Ok, what you
>>need are some Microns 25ns and some toshibas 20ns or 25ns.
>>Here is the part number for the 25ns TC55328p-25. The part
>>for the gate that you need is 74HC00N.
>>
>>Gabe

--
  ___________________________Apple IIGS Forever!___________________________
 |Zelix (Peter Handel)                         Sysop of "SitA IV: GSXpress"|
 |handel@stolaf.edu                            (507)646-2450 (Midnight-9am)|
 |_________Whatdoesitprofitaman,togainafortune,andyetloseyoursoul?_________|