[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: SCSI Expander woes -- HELP!
- Subject: Re: SCSI Expander woes -- HELP!
- From: dempson@actrix.gen.nz (David Empson)
- Date: Fri, 8 Jul 1994 11:42:43 GMT
- Newsgroups: comp.sys.apple2
- Organization: Actrix Information Exchange
- References: <2vej8s$nkc@reeve.research.aa.wl.com>
In article <2vej8s$nkc@reeve.research.aa.wl.com>,
Paul Schultz <schultp@aa.wl.com> wrote:
>
> I pulled the SCSI Expander and examined it. The 50 pin connector
> that the drive 'slides' onto has some solder 'bridges' across
> some of the solder joints on the back side of the card.
This could just be providing a good solid ground connection - every
second pin in the SCSI bus is a ground line. This will be all of the
pins on one side of the 25x2 connector.
--
David Empson
dempson@actrix.gen.nz
Snail mail: P.O. Box 27-103, Wellington, New Zealand