Re: //e revisions?

[st3b1@jetson.uh.edu (Fretz, David)]

In article <Coo72z.8oC@crash.cts.com>, shack@crash.cts.com (Randy Shackelford) writes...
>In article <mnementhConK2M.JH8@netcom.com>,
>David R. Villegas <mnementh@netcom.com> wrote:
> 
>Revisions refer to part numbers on the logic boards. 820-0064-A was the first
>revision, which was not capable of displaying DHR graphics. It didn't last long
>and was replaced by 820-0064-B which is the board referred to as the rev. B
>board. This is the minimum revision to use for things like the VOC. There is
>also a 820-0087-A board which is sometimes confused with the early rev. A board

  I have an enhanced IIe with the 820-0187-A board.  Is this the right part
number?  I dropped my VOC in it just to get color output with the spare RGB I
have.  Seems to work just fine.  Haven't got the IIE utilities for the VOC to
test it for input and output.

********************************************************************************
  University of Houston    |"The king is gone but not forgotten." (Neil Young)
                           |
  GS Games SIG Coordinator Houston Apple Area User Group  Apple II Forever!
********************************************************************************