Re: Apple //c Serial Card Help Needed

[gachenb@eis.calstate.edu (Greg R. Achenbach)]

biomorph@athena.mit.edu (Bayard Wenzel) writes:
> 
> 
> I've got my apple //c. It's got the built in super serial card, which
> has psuedo RS232-C output (it looks like its missing some of the 
> handshaking, but none of the really important ones). My questions are:
> 
> Does it use true RS232-C output voltages (-12 volts to 12 volts) or
> just ttl logical signals?
> 
> And, how can I configure the baud rate of the board, parity, number of
> stop bits, etc. This is not for an apple modem, just the output jack
> that goes to the modem.

I can't help you on the first question, but to configure either of the 
serial ports all you need is the Apple II System Utilities.  If you don't 
have this, you can ftp it from ftp.apple.com.

> > Thank you, 
> Bayard Wenzel
> biomorph@athena.mit.edu
> 

--
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
Greg Achenbach             gachenb@eis.calstate.edu (soon to be ctp.org)
Los Angeles County Outdoor Science School

"Society is like a stew.  If you don't keep it stirred up, you get a lot of
scum on top."  Edward Abbey