[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: UniDisk3.5

In <1994Mar9.113838.1@iwsd01.itwol.bhp.com.au>
wezamg@iwsd01.itwol.bhp.com.au (George 'Jorgi' Zamroz) writes:

>In article <1994Mar4.050203.11746@pro-sol.cts.com>, jranney@pro-sol.cts.com (John Ranney) writes:
>> Does anyone remember if there is a way to convert the UniDisk 3.5 (old //c)
>> to the more common Apple 3.5 drive without spend a fortune?
>> 
>> ProLine:  jranney@pro-sol
>> Internet: jranney@pro-sol.cts.com
>> UUCP:     crash!pro-sol!jranney
>
>I believe it is just a matter of removing the logic board that sits at the
>top of the drive. The connector inside the drive then just joins up with what
>the board connected with. Have a quick look inside, it should be fairly
>obvious.
>-------------------------------------------------------------------------------
>George Zamroz, BHP Information Technology, Wollongong Region, Australia.
>Address: wezamg@itwol.bhp.com.au (or)
>         george.g.b.zamroz@bhpmelmsm.bhp.bhpmel04.telememo.au

Question......if all this is done, can the drive still be run off of the
regular controller card, or must one pick up a udc card?????

Rob

ProLine:  nuke@pro-nsdapple
Internet: nuke@pro-nsdapple.cts.com
UUCP:     crash!pro-nsdapple!nuke