Re: system error meaniungs

[snash@magnus.acs.ohio-state.edu (Steven E Nash)]

In article <9310040459.AA01185@heartland.bradley.edu> amorton@heartland.bradley
.edu writes:
>
>
>I have recently begun to experience weird problems on my GS. At
>times it wants to repeat certain keys ad infinitum, the only
>way to get it to stop is to power down and start over.
>
>Doing the built in self test I at times get an OK at others get
>bad system with error #09010001. This has happened both with a
>Transwarp card in and out of the system. I at first suspected
>the transwarp card since the transwarp self tests are not
>working properly. When using the dianostic disk everything
>checks out OK when the transwarpm card is removed and one
>gets the 'system speed / interupts failed' message when the
>transwarp card is installed.
>
>I also am frequently getting the fatal system error #0911 upon
>boot up.
>
>Any ideas what could be causing this and steps which can be
>taken to stop it from occuring?
>Thanks in advance,
>Alan Morton

I used to get the #0911 error all the time, I fixed that by getting
a system saver.  I think it has something to do memory.  Mine was caused
by too much stuff in the case causing too much heat.

My .02
Steve Nash
snash@magnus.acs.ohio-state.edu