[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Flaky ZipGS - need help!

Subject: Re: Flaky ZipGS - need help!
From: bazyar@mrcnext.cso.uiuc.edu (Jawaid Bazyar)
Date: Tue, 10 Aug 1993 08:44:10 GMT
Keywords: ZipGS Accelerator
Newsgroups: comp.sys.apple2
Organization: University of Illinois at Urbana
References: <244j5m$ss1@reeve.research.aa.wl.com>
Sender: usenet@news.cso.uiuc.edu (Net Noise owner)

schultp@aa.wl.com (Paul Schultz) writes:

[...]

>I am wondering if I have done something wrong during the upgrade
>or whether I just have a flakey card/computer/whatever set-up.
>All chips and oscillators are oriented correctly and as far as I can
>tell they seem to be firmly seated.

  You might try soldering the crystal directly to the board. Sockets
introduce noise.

--
 Jawaid Bazyar              |   Like UNIX? Like your Apple IIGS? Then ask
 Procyon, Inc.              |   me about GNO/ME for the Apple IIgs!   
 bazyar@cs.uiuc.edu         |   P.O Box 620334
 --Apple II Forever!--      |   Littleton, CO 80162-0334   (303) 781-3273

References:
- Flaky ZipGS - need help!
  - From: schultp@aa.wl.com (Paul Schultz)

Prev by Date: Re: I can't run AWGS in Sys6
Next by Date: TAR
Previous by thread: Re: Flaky ZipGS - need help!
Next by thread: HP + Archiver
Index(es):
- Date
- Thread