F.Y.I.: ImageWriter to Windows...

[krouth@slee01.srl.ford.com (Kevin Routh)]

[ Article crossposted from comp.windows.ms ]
[ Author was Kevin Routh ]
[ Posted on 19 Apr 1993 12:35:55 GMT ]

For your information:

I hooked up my ImageWriter I to my COM1 serial port and used the C-Itoh
8510 driver in Windows 3.1.  The cable I am using is a straight-thru
cable connected to a Null Modem Adapter I got at Radio Shack (catalog
#26-1496a) for $4.95.  It seems to work fine with both DOS and Windows.
I used the following command in DOS

	C:\DOS\mode COM1:9600,n,8,1,p

and set up the port the same way in the Windows Ports setup.

the Null Modem connections are as follows:

	1	to	1
	2	to	3
	3	to	2
	4	to	5
	5	to	4
	6+8	to	20
	20	to	6+8
	7	to	7

I printed from several applications and all seems OK.  

-- 
Kevin C. Routh                     Internet:    krouth@slee01.srl.ford.com
Ford Electronics                   IBMmail (PROFS):               USFMCTMF
ELD IC Engineering
17000 Rotunda Drive, B-121         Voice mail:              (313) 337-5136
Dearborn, MI  48121-6010           Facsimile:               (313) 248-6244



--
Kevin C. Routh                     Internet:    krouth@slee01.srl.ford.com
Ford Electronics                   IBMmail (PROFS):               USFMCTMF
ELD IC Engineering
17000 Rotunda Drive, B-121         Voice mail:              (313) 337-5136
Dearborn, MI  48121-6010           Facsimile:               (313) 248-6244


--
Kevin C. Routh                     Internet:    krouth@slee01.srl.ford.com
Ford Electronics                   IBMmail (PROFS):               USFMCTMF
ELD IC Engineering
17000 Rotunda Drive, B-121         Voice mail:              (313) 337-5136
Dearborn, MI  48121-6010           Facsimile:               (313) 248-6244