Fan for //GS

[swh54716@uxa.cso.uiuc.edu (Scott W. Henson)]

I know this has been discussed on here before, but unfortunately, I did not
save it for future reference.

What are the specs. for the internal fan connector in the IIgs?  Is there
a fan available that will connect directly to it (if so, from where)?

I measured the opening on the side of the power supply, and found that it is
2.5" by 2.5".  If the power connector is 12V, >=200 mA, the local industrial
electronics supplier  has a fan that would fit.

Anyone have an internal fan (either "made" for the IIgs or adapted to the
purpose)?  Any information would be appreciated.

-- 
   /////  /////  ////            Scott W. Henson / Network Administrator
    /     \     /__ /  N             International Studies Building   
   /       \   /   /     E           Internet: scott-henson@uiuc.edu 
/////  /////  ////         T            Voice: 3-6104 (leave msg)