Re: 5 1/4" Floppy Disk Labels

[Geo3 <grent@wowway.com>]

On Aug 6, 11:38 am, Adam Hall wrote:
> > You may simply be removing the label from the backing while the
> > adhesive is still warm from the printing.
> > Laser printers tend to print very hot, at least mine does, so waiting
> > until the paper cools before taking it to the disk may help. I use them
> > just fine.
> > Garberstreet Electronics
> >http://www.garberstreet.com
>
> Nah, a few I just wrote on the labels and had not put them through the
> printer at all. It may be the humidity (Florida is horrible this time
> of year).  I am using Avery 8161 (Ink Jet).

Three things,

 The disk it self has to be clean and dry. Other wise the label will
not stick for long.

 Then you have bend the label so that it does not want to curl up.
This can be done after you pull them off. You want a reverse curl the
length wise.

  If you still have problems then a reverse curl width wise and then
length wise should do the trick.

  If that still does not work then the labels are too old. The only
choice would be a big piece of clear duct tape. You want the "crystal
clear"stuff. It wide enough maybe for 2 labels.

  Tried to email you a few times but all I got was errors.

  Take Care