Re: SSC DTE/DCE "Jumper" Pinout ?

[Zero dB <no@email.com>]

On Thu, 06 Aug 2009 20:38:33 -0700, Zero dB <no@email.com> wrote:

>Greetings All, 
>
>Sorry to trouble you with this, but I've received a genuine apple SSC
>to use in my ][e machine, but it came without the 8-row jumper with
>the triangle printed on it to select "MODEM" or "TERMINAL" on the
>board!
>
> I've had no luck finding out what's going on inside this "selector"
>board, and was wondering if someone could give me a definitive
>schematic for the terminal selector block that is used on the SSC, and
>how it's relative to the arrow's position ?
>
>Guess I'll need to just use some breadboard jumpers to make the proper
>closures... just need to know which to close. Will be using both modes
>at different times. 
>
>Thank you so much!  I am steamed that the jumper block was not
>included!! grr :)
>
>Thanks again. 
>Jayson

Try and beat THAT response time on anywhere but usenet!  ;)

Thanks for your time guys. 

That did the trick. Thanks so much to you both.  xfers in progress,
100% success rate. 

Kind Regards,
 Jayson