Re: TransWarp/RAMFast Clash

["Bill Garber" <willy46pa@comcast.net>]

<mswaine681@aol.com> wrote in message 275aa547-4331-4269-a001-9e2405af72af@a70g2000hsh.googlegroups.com">news:275aa547-4331-4269-a001-9e2405af72af@a70g2000hsh.googlegroups.com...
On Jun 3, 10:07 pm, CC Rider <alask...@yahoo.com> wrote:
> On Jun 3, 7:00 pm, mswaine...@aol.com wrote:
>
> > I have nearly the same setup:
>
> > ROM 3
> > stock TWGS (slot 3)
> > Ramfast rev D (slot 7)
> > Sequential Sytems 4 meg
>
> > I also have a 384 meg Focus (slot 6), a Uthernet (slot 4), a VOC (slot
> > 5) and a Prograppler (slot 1) in there. Crowded, but everything works
> > great. Are you using the original power supply? I used to have
> > problems before I got an ATX,
>
> > MS
>
> I had contemplated an upgrade. What is your power supply setup? Did
> you buy or build the pieces?- Hide quoted text -
>
> - Show quoted text -

: Well, it may help and it may not. I don't know if those few cards
: would pull that much power. If I were you, I'd wait until I heard from
: the other guys on this site. They're a mine of information and they
: may have another (better) solution for your problem. They've seen it
: all.
:
: As far as my power supply setup goes, I got the LittlePower adaptor
: from Reactive and pulled an ATX supply out of an old PC. Quick, cheap
: and painless. I went external, but Reactive has a source for a small
: supply that fits inside the case.


I have a Buggie AT supply, never installed. Only out of box to see
what it looked like, and also Henry's 200 watt IIgs PSU with the
floppy and hard drive connectors, which I find works great with
any setup I've had in there. I've had as much as:

Superdrive - slot 7,
Microdrive - slot 6,
CMS SCSI II - slot 5,
Zip-GSX - slot 4,
CFFA - slot 2,
and Focus with 128 MB HD - slot 1.

It handles all of that, but, I can't vouch for longevity,
since I haven't been running it very long at one time.

Bill Garber from GS-Electronics
http://www.garberstreet.com