ADTPro problem - non-SSC serial cards supported?

[jim@magrathea.plus.com (Jim)]

I'm trying to use ADTPro 1.0.2 to transfer some disk images from my
Windows PC.

I've (finally!) got the serial comms working to some extent, and can
successfully send the PRODOS image from the Bootstrap menu, followed by
the ADTPro Serial Client.

Here's where it starts to go a wee bit wrong.

I go into Confi(G) and set the comms as best I can, however it assumes
either an SSC in one of the sockets, or one of two modems. I choose SSC
in slot 2 (with the correct baud rate), but I don't actually have an SSC
card, I have a CSS 7710.

Attempting to (R)eceive images from the host PC fails - it sits on
'WAITING ON HOST REPLY, ESC CANCELS', the host PC seemingly unaware that
it's being talked to.

Would I be correct in assuming that ADTPro is trying (and failing) to
initialise an SSC card that isn't there, or have I missed some
blindingly obvious fact that's tripping me up?

On the host, when I change the working directory from File->Change
Working Directory, should I see a list of the .DSK files in there or is
it just a directory picker? I only ask because the file list is always
blank, despite there being at least two .DSK files present.

Many thanks, and I'm really sorry for all these questions.

Jim
-- 
Find me at http://www.ursaminorbeta.co.uk
AIM/iChatAV: JCAndrew2
Skype: greyarea