Re: Problems w/ ADTPro Vista-A2Gs

[bnfmsgeek <bnfmsgeek@gmail.com>]

On Aug 9, 2:22 am, bnfmsgeek <bnfmsg...@gmail.com> wrote:
> On Aug 9, 1:23 am, schmidtd <schmi...@my-deja.com> wrote:
>
>
>
> > On Aug 8, 11:18 pm, bnfmsgeek <bnfmsg...@gmail.com> wrote:> When I click "OK" and the program starts
> > > sending ProDOS part 1, all that is shown are blackslash - such as this
>
> > > ] /
> > > ] /
> > > ] /
> > > ] /
> > > ect.
>
> > My best guess is there's a mismatch in serial port speeds.  The
> > relevant thing here is the message the ADTPro server puts out with the
> > "Click Ok when ready" message - it tells you the command to type on
> > the GS to set the matching serial port speed.  The default is 9600
> > baud, which equates to <Ctrl-A>14B on the GS.  Do you get the little
> > "?" prompt on the GS when you hit <Ctrl-A>?  And make sure not to add
> > any spaces in the key sequence between that and the "14B" part.
>
> Close, but no cigar.

Just for kicks, I tried changing the modem cable (I happened to have
2)... and success (At least so far).

I knew it was something little. Thanks for your help anyway!

-bnfmsgeek