Re: Problems w/ ADTPro Vista-A2Gs

[bnfmsgeek <bnfmsgeek@gmail.com>]

On Aug 9, 1:23 am, schmidtd <schmi...@my-deja.com> wrote:
> On Aug 8, 11:18 pm, bnfmsgeek <bnfmsg...@gmail.com> wrote:> When I click "OK" and the program starts
> > sending ProDOS part 1, all that is shown are blackslash - such as this
>
> > ] /
> > ] /
> > ] /
> > ] /
> > ect.
>
> My best guess is there's a mismatch in serial port speeds.  The
> relevant thing here is the message the ADTPro server puts out with the
> "Click Ok when ready" message - it tells you the command to type on
> the GS to set the matching serial port speed.  The default is 9600
> baud, which equates to <Ctrl-A>14B on the GS.  Do you get the little
> "?" prompt on the GS when you hit <Ctrl-A>?  And make sure not to add
> any spaces in the key sequence between that and the "14B" part.

Close, but no cigar.