Re: NTSC Apple //e mainboard: Connectors?

[Linards Ticmanis <ticmanis@gmx.de>]

David Wilson wrote:

> An alternative is to solder a 28 pin socket onto the top of a 24 pin
> plug and route the highest address line to a flying lead and attach
> that to the switch.

Ok, did this now and it works well.

It occurred to me though that I could simply have used a 2732 chip
instead with a single external wire soldered to it, no need to use a
real adapter or go hunting for exotic EPROMs, since half of the 2764
isn't used at all. Two Apple fonts occupy only 4K, not 8K.

-- 
Linards Ticmanis