Re: XRGB-3 scan converter

[crazeduser@gmail.com]

Tom Greene wrote:

> The nice part is it was simple to connect the GS to it, It has a 15-pin
> VGA-style RGB input connector, and a 15-pin Mac video cable with an
> adapter worked fine with it. It can also accept an 21-pin SCART-style
> connector, although the pinout of the Japanese connector is supposedly
> different from the European SCART. The XRGB-2+ had only the 21-pin
> connector, so a special cable was required.

What kind of adapter are you using to bridge a IIGS DB15 RGB output to
VGA Dsub15?

XRGB3 documentation specifically states that the VGA input terminal on
the XRGB3 only supports sync rates of 32 and 48 kHz.  Only the 21pin
Multi RGB AV connector supports 16 kHz sync input.

> The bad news is I've tried both the 15-pin and 21-pin inputs and the
> analog and digital outputs, and in all cases the display is somewhat

Did you try the 21 pin multi AV connector?  I am confused because your
comment above that it is "supposedly different from the European SCART"
sounds like you don't have the right cable to try it.

Regards,
 -Jim