Re: Marinetti - where to download? Or is it commercial?

["Warren Ernst" <wernst@gmail.com>]

Andrew,

Thanks very much for the explanation, and for your hard work. I'm
really looking forward to playing with the results this week.

-Warr


roughana wrote:
> Apologies for the confusion that this is obviously causing.
>
> Perhaps I can help with the understanding a little.
>
> The Marinetti official home page
> http://www.apple2.org/marinetti/index.html
> refers to v2.01 which is the last 'golden master' release.
>
> Development continues as part of the Marinetti Open Source Project and
> when a new 'golden master' is created, the Marinetti official home page
> will be updated to refer to it.
>
> In the meantime, there are later beta versions of Marinetti available
> for download from the Marinetti Open Source Project site.
>
> The latest version is 3.0b3, but this is just a patched Init and it
> must be manually installed on top of a previous 3.0b1 installation.
>
> You can get 3.0b1 here
> http://prdownloads.sourceforge.net/marinetti/Marinetti3.0b1.SHK?download
> 3.0b1 is a full installation and you do not need to install 2.01 first.
>
> You can get 3.0b3 here:
> http://prdownloads.sourceforge.net/marinetti/TCPIP30b3.SHK?download
>
> At Kfest I said that I aim to have a 3.0 (ie. 'golden master') released
> before the end of the year.
>
> I hope that clears up any confusion.
>
> Regards,
> Andrew
>
> Warren Ernst wrote:
> > Wait, wait. I found what i was looking for at:
> >
> > http://prdownloads.sourceforge.net/marinetti/Marinetti3.0b1.SHK?download
> >
> > Thanks,
> > Warr
> >
> > Warren Ernst wrote:
> > > A2Aviator,
> > >
> > > Thanks for the reply. Let me make sure I understand.
> > >
> > > Do I first download and install 2.01 from
> > > http://www.apple2.org/marinetti/index.html, and then download and
> > > install 3.0b1 over 2.01?
> > >
> > > And if so, is the 3.0b1 you're talking about over here:
> > >
> > > http://sourceforge.net/project/showfiles.php?group_id=16176
> > >
> > > under the "Object code  	TCP/IP Init 3.0b3  	July 22, 2006" link?
> > >
> > > Or do I just download and install this second link's stuff directly? I
> > > don't think that is the case, because the notes for the file at this
> > > second link says: "That is, for a clean/fresh/first time install you
> > > will also need to download Marinetti 3.0b1 and install that first."
> > >
> > > I think *this* is what I want, and I only see it for sale from
> > > Syndacomm for $4 for a disk. If this is downloadable, where is it?
> > >
> > > -Warr
> > >
> > >
> > >
> > >
> > >
> > >
> > > a2aviator@gmail.com wrote:
> > > > > I can't seem to find anything worth downloading. The Sourceforge page
> > > > > has just a single patched 3.0b1 file. The Marinetti home page just has
> > > > > 2.something to download.
> > > >
> > > > Release Name: Marinetti 3.0b1
> > > >
> > > > Notes:
> > > > Marinetti 3.0 b1 Installer.
> > > >
> > > > This will install over an existing 2.0.1/3.0 install.
> > > > This is a complete installer. Any prior installs will be removed.
> > > > Backup any non standard Link-Layer files that you have installed. If it
> > > > was not installed by Marinetti, it's going to be removed.
> > > >
> > > > This installer requires System 6.0.1 and 2MB of RAM.
> > > >
> > > > > I am guessing that somewhere there is a Marinetti 3.0 downloadable
> > > > > package, to which I would add the patched 3.0b1 file and the Uthernet
> > > > > driver. So where on the net would I find it?
> > > >
> > > > http://www.apple2.org
> > > > Marinetti - the 2.0 release and related information
> > > > MOSP: Marinetti Open Source Project - the 3.0 release and related
> > > > information.
> > > >
> > > > MOSP redirects to Sourceforge where under object code is the 140K file
> > > > mentioned above;