Re: IIGS - ADB Joystick work?

["Simon D. Williams" <bb065@chebucto.ns.ca>]

On Fri, 11 Aug 2006, Bill Garber wrote:

> 
> "Simon D. Williams" <bb065@chebucto.ns.ca> wrote in message
> Pine.GSO.3.95.iB1.0.1060811001307.22048A-100000@halifax.chebucto.ns.ca">news:Pine.GSO.3.95.iB1.0.1060811001307.22048A-100000@halifax.chebucto.ns.ca.
> ..
> : On Thu, 10 Aug 2006, Bill Garber wrote:
> :
> : > At one time, someone was making sticks with both the IBM and Apple II
> : > compatible resistances, and both connectors attached to a single cable.
> : > All you needed do was to flip a switch. Yes, they do need a conversion
> : > connector, as I believe we had discussed at one point in time. I have
> our
> : > findings and your ascii schematic on file, just haven't made anything
> yet.
> : >
> : > Bill Garber
> :
> : I have several like this, with the IBM/APPLE switch underneath... they all
> : have a double-ended cable. Oddly enough I've seen plenty of IBM-only
> : versions of the same stick, but never an Apple-only one.
> : The barnd name is QuickShot.
> :
> :  _____
> : |[LD8]! :::::::: RetroChallenge 2006 Endurance Blog :::::::::
> : |  o. | ::::::::::: " 8-bit to the Bitter End! " ::::::::::::
> : !__!__! ::::::::: http://www.chebucto.ns.ca/~bb065/ :::::::::
> 
> Loan me one so I can crack it and see what's inside.
> 
> Bill Garber

You didn't say "please"    ;-P

Email me your address and I'll fire one off forthwith (this email is
valid).
-s
 _____ 
|[LD8]! :::::::: RetroChallenge 2006 Endurance Blog :::::::::
|  o. | ::::::::::: " 8-bit to the Bitter End! " ::::::::::::
!__!__! ::::::::: http://www.chebucto.ns.ca/~bb065/ :::::::::