Re: cf card to ide adaptor will it work via vulcan controller?

["Bill Garber" <willy46pa@comcast.net>]

"mr. brad" <mrbradremove@ll.net> wrote in message
FsadnSqz2IKAVEvZnZ2dnUVZ_tWdnZ2d@ll.net">news:FsadnSqz2IKAVEvZnZ2dnUVZ_tWdnZ2d@ll.net...
: the above link has the following little device a CF card to IDE
: adaptor..dual..for use with old pc's as ide drives i gather....(ie ancient
: like 200meg ide drives)
:
: anyway....the link is below it is like 99c for one and like around $6 to
: ship it..but what i was wondering is...could this be used on the end of a
: vulcan internal card for the // line with a standard ide cable..i have a
: vulcan card but no
: hd with it...i think? gse-reactive.com has an adaptor that does the same..
:
: anyway just wondering what you all think here....be interesting if such
: devices would replace an ide for say the primus hd card...or focus hd card
: ...or vulcan hd card..all of which are ide i think
:
: of course maybe most/some of you already know this works and i again am
: behind the curve (common to me)
:
: anyway what do you think here is the link
:
:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=020&item=300014948484&rd=1&;
sspagename=STRK%3AMEWA%3AIT&rd=1
:
: feedback here for all to see is fine
:
: brad
: former sysop lost gonzo bbs

Brad, I have a Vulcan set up this way, and the best I could get to
work is a 20 MB CF card, a Sandisk. It was a SOB to get it formatted
and once I did, that's how it must stay. Read from it, write to it,
but I'm definitely not even going to attempt another formatting. If
I were you, I'd abandon the idea and go for something else.

Now, the Focus may work, but I haven't tried it, and I've never seen
a Primus at all. So far, the best bets are the Microdrive and CFFA.

Bill Garber