[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Cable construction queries...

I don't think any annunciators exists in the db9 pinout. There's only space for ground, +5v, 3 buttons, 4 pots. 



Simon D. Williams wrote:


I'm hoping to build a trigger in/out cable for my DX-1 sampler to
synch with some homemade software. It looks like this should be a fairly
simple project involving a paltry 3 wires, thus:
A2 Game Port 
                1       16
Trig In (PB0)   2       15  Trig Out (AN0)
                3       14
                4       13
                5       12
                6       11
                7       10
       Ground   8        9

easy enough... HOWEVER, I would prefer to use the IIe's external game
port, if possible, but have not been able to figure out if Annunciator 0
exists on the 9-pin socket and which pins correlate. Some expert guidance
would be appreciated :)
-s

.._____. SIMON WILLIAMS :::::::: LUDDITE ENTERPRISES UNLIMITED
|[LD8]! 8-BIT SOUND & FURY : APPLE ][ AUDIO & MUSIC RESOURCES
|  o. | +------- http://8bitsoundandfury.no-ip.info/ -------+
!__!__! OLD APPLE WEB SERVER LIST http://www.ld8.org/servers/