Re: ProTERM 3.1 to PC via Hyperterminal

[citaria@hotmail.com (Kellion)]

"Laine Houghton" <laine@intergate.com> wrote in message news:<10ltiil3r0eug2e@corp.supernews.com>...
> "Kellion" <citaria@hotmail.com> wrote in message
> b8c7bc2e.0410011849.296397b1@posting.google.com">news:b8c7bc2e.0410011849.296397b1@posting.google.com...
> > Hello all,
> >      I have a very strange problem I have been playing with for a
> > while here.  I am trying to do "Null Modem" transfers via my PC with
> > Hypertermain to my Apple //e with ProTERM 3.1
> >
> > I have ADT working just fine with the SSC settings for that and even
> > ProTerm 2.0 works well.  Just can't seem to get ProTERM 3.1 up and
> > rolling.  I set up
> > a "system" in ProTerm called "LOCAL", 9600, and no phone number.  On
> > the PC side, I open the COM1 port and on the Apple //e side I tell
> > ProTERM to Dial.  ProTERM sees the connection and if I send characters
> > from the PC to the Apple //e REALLY SLOW.  They show up, but anything
> > faster and it prints the first character and nothing else (once in a
> > while it'll print an extra character I sent.)
> >
> > Example:
> >
> >   PC sends: TESTING123
> >
> >   ProTerm shows: T
> >
> > I have tried this at just about any baud rate (300,1200,9600)
> >
> >
> >   PC sends: TESTING123TESTING123
> >
> >   ProTerm shows: TT2T
> >
> >
> > I am certain the connection is working as it works fine with ADT and
> > ProTerm 2.0.  Very strange.
> >
> > Any insight would be appreciated.
> >
> > Kellion...
> 
> Just want to make sure you are using the null modem driver.
> 
> From memory I think it is OA-I on boot or the 'MISC' menu has something like
> install or setup.
> When the modem selection comes up look for null modem.


Yep definately double checked to make sure I had it set to "Null Modem Driver"

Kellion...