Re: WaZaBoo! May be down for a while

["brad" <mrbrad@ll.net>]

i'd recommend www.synchro.net if you want to run a pc based bbs..it is
freeware/supported actively (updates every 3months or so..major updates)
check it out it is a painless install and he even has a dynamic ip setup for
sysops that use this pkg ..even works with a dialup inet accnt

brad
former sysop lost-gonzo.com


"dj_lx" <dj_lx1@earthlink.net> wrote in message
8a6c6b9f.0312251516.6e29966@posting.google.com">news:8a6c6b9f.0312251516.6e29966@posting.google.com...
> "Bill Garber" <willy46pa@comcast.net> wrote in message
news:<NfednZwT_McssHeiRVn-ug@comcast.com>...
> > "dj lx" <dj lx1@earthlink.net> wrote in message
> > 8a6c6b9f.0312241313.53a2ea60@posting.google.com">news:8a6c6b9f.0312241313.53a2ea60@posting.google.com...
> > : I have a problem with the RamFAST V.3.00h.    I unplugged one modem
> > : and plugged in another while the GS was still on. Now Everytime I boot
> > : the GS the hard drive spins with the little light on and Ram FAST
> > : tries to scan the hard drive but the little light spins too. I have
> > : tried pressing "0" for the RamFAST menu and then scan for the hard
> > : drive but that doesn't work, either. I have tried taking out the
> > : RamFAST card and booting that way then replacing the RamFAST card with
> > : no luck either. Does anyone know how to fix this?
> > :
> > : Alexey
> >
> > There is no way to be sure, but I doubt that
> > unplugging a serial cable would have an effect
> > on the operation of the SCSI card. Did you check
> > to be sure that your battery didn't die and make
> > the slots revert to default status? I had a RamFast
> > SCSI with 3.00H ROM and I sold it because I couldn't
> > get it to work right in my ROM-3 IIgs. I recently
> > picked up a High Speed SCSI card, but haven't used
> > it as yet. I'm still trying to get reorganized here.
> > Anyway, try resetting your control panel to default,
> > running the system, and then only install the SCSI
> > card and drive. Then if all is well there, begin
> > to install the rest of your system. Can't think
> > of anything else to do.
> >
> > Bill @ GarberStreet Enterprizez };-)
> > Web Site - http://garberstreet.netfirms.com
> > Email - willy4SPAM6pa@comXcast.net
> > Remove - SPAM and X to contact me
> >
> >
> >
> > ---
> > This email ain't infected, dude!
> >
> > Checked by AVG anti-virus system (http://www.grisoft.com).
> > Version: 6.0.544 / Virus Database: 338 - Release Date: 11/25/03
>
>
>
> NO the control panel is normal, slot 7 for "Your card" and everything
> else is ok. The battery didn't die, I think. I did try ProSEL off of a
> flopy and got a response that said "Unable to load ProDOS. When I
> first got the GS out of the attic it was cold and did the same thing,
> drive spinning and extra light on. Then after about 20 tries it
> booted. I am looking into IBM PC BBS's maybe I can get that to work.
> My boss at work is buying me a new computer, probobly with speakers,
> and a fast one, I own music software so I can make music. I will use
> the old comp0uter to run a PC BBS, if I can't get the GS to work.
>
> Alexey