Re: Dos CP/M on a Z80 card require an 80 column card to work?

[pausch@saaf.se (Paul Schlyter)]

In article <qwmdnfRJt9A_5_aiU-KYuQ@comcast.com>,
Bill Garber <willy46pa@comcast.net> wrote:
From: "Bill Garber" <willy46pa@comcast.net>
Subject: Re: Dos CP/M on a Z80 card require an 80 column card to work?
 
> "Paul Schlyter" <pausch@saaf.se> wrote in message
> news:bkfqoi$s9q$1@merope.saaf.se...
>
>> The dip switches on the Z80 card may have been set improperly -- all
>> 4 of them should be set to the OFF position to run Apple CP/M.
> 
> Come to think of that. I do need switch 4 set to ON to run it
> with my 80 column card in place. Sorry that I didn't remember
> that part.
 
Strange --- my Z80 Softcard always worked with an 80-column card with
all the 4 Softcard dip switches set to OFF.  It's a Microsoft
Softcard, and the 80-column card was a Videx card.
 
-- 
----------------------------------------------------------------
Paul Schlyter,  Grev Turegatan 40,  SE-114 38 Stockholm,  SWEDEN
e-mail:  pausch at stockholm dot bostream dot se
WWW:     http://www.stjarnhimlen.se/
         http://home.tiscali.se/pausch/