Re: Vulcan Partition Manager 2.0

["GarberStreet Enterprises" <willy46pa@comcast.net>]

"Wayne Stewart" <waynes@telus.spamless.net> wrote in message
3E31E69C.4060207@telus.spamless.net">news:3E31E69C.4060207@telus.spamless.net...
>
>
> Michael J. Mahon wrote:
>
> > Version 2.0 is a newer version than mine.
> >
> > I'm very curious about your ROM upgrade--what does it do for you?
> > Will it permit a larger drive?  Is it IIgs-specific, or is there a //e
upgrade,
> > too?
>
> The ROM is for the 100mb Vulcan. It'll work with my currant 40mb
> drives but I'm hoping to use it with a larger and newer drive. A
> drive with cache should give me an effective speed increase. But
> I can't try out a larger drive until I get a newer version of
> the Vulcan Partition Manager as my version won't recognize the
> controller with this EPROM installed.
>
> I believe I've used a IIgs ROM equiped controller with a IIe
> Vulcan but that was likely 3 years ago so I'm not completely sure.
> When I next come across that particular IIe I'll try it.
>
> Wayne
>

Hi,

The IDE controller I am making available to the US is
assumed to run up to 2 gb drives either laptop or external.
It is also ready to rock and roll with all software and
firmware provided. They come with either a combo
firmware for //e enhanced or ][gs and also can have a ][gs
specific firmware prom. If you are an avid Apple II power
user, this is the device for you. It also replaces your
Vulcan adapter completely and will control it much better.
Check it out at the site below. There are pics with drive
attached.

Bill @ GarberStreet Enterprises
http://garberstreet.netfirms.com