Re: 911 Fatal Error on TransWarp GS?

[Rubywand <rubywand@swbell.net>]

Bryan Parkoff writes ...
> 
> 911 Fatal Error on TransWarp GS
> 
>     My Apple IIgs motherboard is ROM 01.  It has TransWarp GS with 32K cache
> board.  This 32K cache board is manufacturered by Applied Engineering since
> I upgraded from 8K to 32K.
>     I get 911 fatal error too often while I am working on AppleSoft BASIC,
> monitor machine, and GS/OS 6.0.1.  I turned off and turned on, but I still
> get the same error message.  It is turned off for least 30 minutes and then
> it turned on.  It is working, but get the same error message next couple
> minutes.
>     I switched three different Apple IIgs ROM 01 motherboards, but the error
> message continues to exist.  I believe that it has nothing wrong with three
> different motherboards.  It must have something wrong with TransWarp GS.  I
> used two different Zip GS on both motherboards and they operate fine with no
> problems.
 ....

     Here's another idea on the 0911 error (from the old A2-Central on-line
'zine, April 1994):

>>
     I have an Apple IIGS and I had the same problems with the key presses
(Error 911).  I tried several changes to my IIGS - a fan, a bigger power
supply, with NDA's or Inits and without - nothing I did seem to help.  I got
the idea to try changing the keyboard so I replaced the keyboard with another
IIGS keyboard from a system that did not have the problem. Success!  So I
suggest to Raj to try a new keyboard - it worked for me.
 
Sincerely,
 
Guenther Unger
<<



Rubywand