Re: Central Point software Board ??

[Louis Cornelio <clairmnt@n2.net>]

In article <3d67a088_3@news3.prserv.net>, "Tom Zuchowski" 
<tzuchow@attglobal.net> wrote:

> I got your card jpg, Louis. It looks like perhaps Wayne had the right 
> info
> for you. The "Laser" UDC cards I have are much smaller and use 
> surface-mount
> components, and have permanently attached cables.

Well I got to test it out & it works great. I think it did want the 3.5 
drive before the 5.25, but everything works!!

well, everything except the EJECT button :(

- Louis


> 
> "Louis Cornelio" <clairmnt@n2.net> wrote in message
> news:clairmnt-0A7BAC.21575821082002@news-server...
> > In article <3D643946.1FA3D4BC@intergate.ca>, Wayne Stewart
> > <waynes@intergate.ca> wrote:
> >
> > > If it's got a 1986 date on it, then you're right except that it's the
> > > earlier full sized Universal Disk Controller(UDC) card. 36 chips plus
> > > assorted resistors and diodes. It had two 20 pin connectors and
> > > originally
> > > came with two 19 pin to 20 pin adapters. One of the nice things about
> > > it was if you wanted you could hook up one 5.25" and one 3.5" drive 
> > > to
> > > the
> > > card and save a slot. Handy for people who have every slot full and 
> > > have
> > > to
> > > swap cards all the time.
> >
> >
> > wayne - thanks for the good   info - I am sending a jpeg to you as well
> >
> > cheers!
> >
> > -louis
> 
>