Re: See what Nishida Radio has been up to

[scott@alfter.diespammersdie.us (Scott Alfter)]

In article <kg08cd$erf$1@news.xmission.com>,
Egan Ford  <datajerk@gmail.com> wrote:
>On 2/18/13 9:05 PM, nyder wrote:
>> You might be able to find a 9 pin DB connector to  BNC cable, though
>most I have ever seen in places are the 15pin DB connector BNC cables.  
>If you did find one of the 9 pin DB BNC cables, at worse you'd have to
>make an adaptor for it, nothing hard to do.
>
>The IIGS has a 15pin DB connector for RGB, correct, so is there a 
>standard DB15 to BNC RGB cable that works with the IIGS?

I'd think you could use a Mac-to-VGA dongle and a VGA-to-5BNC cable.  Both
of those are (or were) fairly standard parts, though maybe a little harder
to come by nowadays.  If the dongle you buy is one of the universal models
with a block of dipswitches, you should be able to ignore the switch
settings when using it with a IIGS.

(I've never had a monitor with a 5BNC input that would sync down to 15.5
kHz, but I have an NEC MultiSync 3D that I can plug into my IIGS with the
Mac-to-VGA dongle that was bundled with the monitor.)

  _/_
 / v \ Scott Alfter (remove the obvious to send mail)
(IIGS( http://alfter.us/            Top-posting!
 \_^_/                              >What's the most annoying thing on Usenet?