Re: ADTPro stuck at 273

[Michael J. Mahon <mjmahon@aol.com>]

Egan Ford <datajerk@gmail.com> wrote:
> When writing to a diskette ADTPro gets stuck at 273 (of 280) and the
> floppy drive is making a lot of noise.  I've had this problem with
> my //e and //c on and off ever since I started using ADTPro (versions
> 1.1.5 - 1.1.9).  It's worse on the //e.  It does not matter if the
> diskette image is DOS 3.3, ProDOS, or CP/M.  Same problem in the same
> place (273).  I've tried 3 different brands of diskette.  Formatting
> and reformatting.
> 
> Reading diskettes works 100% of the time.
> 
> Others seen this?  Thanks.

Have you tried a different disk drive?

-michael - NadaNet 3.1 and AppleCrate II: http://home.comcast.net/~mjmahon