Re: ADTPro stuck at 273

[Kevin Dady <kevin@hackaday.com>]

On Dec 29, 7:45 pm, Michael J. Mahon <mjma...@aol.com> wrote:
> Egan Ford <dataj...@gmail.com> wrote:
> > When writing to a diskette ADTPro gets stuck at 273 (of 280) and the
> > floppy drive is making a lot of noise.  I've had this problem with
> > my //e and //c on and off ever since I started using ADTPro (versions
> > 1.1.5 - 1.1.9).  It's worse on the //e.  It does not matter if the
> > diskette image is DOS 3.3, ProDOS, or CP/M.  Same problem in the same
> > place (273).  I've tried 3 different brands of diskette.  Formatting
> > and reformatting.
>
> > Reading diskettes works 100% of the time.
>
> > Others seen this?  Thanks.
>
> Have you tried a different disk drive?
>
> -michael - NadaNet 3.1 and AppleCrate II:http://home.comcast.net/~mjmahon

well since the op mentioned a //e and a //c I would assume so ....

what os is the host computer, have you tried other host computers, are
you using "real" serial ports or a usb thingie, and if your using
"real" serial ports are they -12+12 RS232, or the more recent eh 0-5
will cut it variety?

dunno, just shooting out idea's