Re: HELP!! Needed /transwarp & IIGS??

[Tony Cianfaglione <ab616@chebucto.ns.ca>]

You shouldn't have to set it 'your card' as the TWGS is transparent and
shows up anyway.  My slot 4 is set to Mouse Port and it still sees my
TWGS. 

---------------------------------------------

On Thu, 17 Jan 2002, Barry Allen wrote:

> In article <16865-3C46B5D3-132@storefull-225.iap.bryant.webtv.net>,
> MagicChiz@webtv.net (John Chism) wrote:
> 
> > Hello,
> > 
> > Ok I got this IIGS, it is a 01 version.  it came setup with a transwarp
> > in it.  Eveything worked fine untill my battery for the clock and
> > control panel went dead.  I found a replacement battery and cut the old
> > one out & installed the new one.  
> > Now when I go in to my control panel it does not show the transwarp
> > menu's.  the light on the transwarp does come on when I turn on the
> > system.
> > Do I need to install something?  The instructions do not talk about any
> > software.    Any help would be great.
> 
> I'd say yank the Transwarp and make sure the fingers (contacts) are clean
> on the card, replace and make sure the card seats firmly. The most likely
> problem is that the Control Panel needs to set to "YOUR CARD" whatever slot
> the Transwarp is in. With no battery, it changed back to the default
> setting of whatever slot the Transwarp is in and the GS doesn't see the
> card. 
> 
> And there is no software, the control panel installs itself when you insert
> the card. Also make sure the CPU replacement chip is seated correctly as
> well.
> 
> Barry Allen
> 
>