Re: Wanted: RamFAST SCSI card

["william strutts" <wrstrutts1@nospam.home.com>]

"Wayne Stewart" <waynes@intergate.bc.ca> wrote in message
3B92FC94.E4A1553A@intergate.bc.ca">news:3B92FC94.E4A1553A@intergate.bc.ca...
>
>
> Raj Wurttemberg wrote:
>
> > I think my RamFAST SCSI card is toast. :(  I get all kinds of fatal
> > errors when I try to access my SCSI Zip drive. I thought it was the
> > RAM chips but I replaced them with an identical pair and got the same
> > results.  My card is BIOS revision 3.01e.
>
> Have you tried other SCSI devices and cables or terminators?
> If you haven't got it setup that way, try putting on the term power
> jumper
> on your ramfast. With the jumper on you should be able to get into the
> Ramfast utility by holding down the 0(zero) key while you power up you
> computer
> What are the error codes you're getting?
>
>     Wayne

RamFAST cards don't require terminators.

--
--
William R. Strutts - wrstrutts1@nospam.home.com - Whatever!

C'est moi!  http://www.facelink.com/wrstrutts

Just hacking away...

Remove nospam to reply.