Re: IIgs doesn't see the SCSI harddrive.........

[Courtney Thomas <ccthomas@flash.net>]

Thanks for your attention again.

I contacted Seagate and you're right, it won't provide term_pwr. And
since the Apple High Speed card won't either, apparently this is an
unworkable duo. 

Unless,.....

I alter the SCSI card, which I'd prefer avoiding, or.........

The drive [ST32550WC] has an adapter [KEY Circuit 0299 - TRANS
INTERNATIONAL 880-0051 REV B00] with some jumper pins on it but I am
ignorant as to where I might find jumper info. But Seagate indicated
that this was a possible source of term_pwr. 

Anyone got any information on these adapter people ?

Gratefully,

Courtney




Marsha wrote:
> 
> [posted and mailed]
> 
> Courtney Thomas <ccthomas@flash.net> wrote in
> 3B8DC65F.52189D13@flash.net:">news:3B8DC65F.52189D13@flash.net:
> 
> > I am using the Apple High Speed SCSI card set to ID 7.
> > I am gratified at my query's attention but a solution still eludes.
> 
> Looking at a FAQ, that card doesn't provide terminator power, have to set
> the drive to provide it?
> 
> You could always try it without that external terminator.
> 
> What ID is the drive itself set to?
> 
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----==  Over 80,000 Newsgroups - 16 Different Servers! =-----