[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: DuoDisk and IIgs
- Subject: Re: DuoDisk and IIgs
- From: Rubywand <rubywand@swbell.net>
- Date: Tue, 14 Aug 2001 11:07:42 -0500
- Newsgroups: comp.sys.apple2
- Organization: SBC Internet Services
- References: <9l7kdu$df7$1@News.Dal.Ca>
- Xref: archiver1.google.com comp.sys.apple2:12262
Jonathan Adams writes ...
>
> I found an article in the comp.sys.apple2 FAQ's about modifying the
> DuoDisk to work with the IIgs. The analog boards in both of my DuoDisks
> are marked 676-0107-B. The instructions for performing the modification on
> a 676-[]107 board say to cut out resistor R39, located at position A1.
> Resistor R39 in both of my DuoDisks is located at position C3. Can anybody
> help clear this up for me? I don't want to take out the wrong resistor.
>
....
According to Apple's tech notes, C3 is the correct position.
Thanks for spotting the glitch. The error in the FAQs has been
corrected. (It may take a few weeks for the correction to propagate to all
FAQs versions.)
Rubywand