[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: New to the Apple IIGS, unknown card in slot 7.
- Subject: Re: New to the Apple IIGS, unknown card in slot 7.
- From: "Matthew S. Carpenter" <msc1983@mac.com>
- Date: Wed, 25 Jul 2001 07:37:43 GMT
- In-reply-to: <B783B69F.9A41%msc1983@mac.com>
- Newsgroups: comp.sys.apple2
- Organization: Excite@Home - The Leader in Broadband http://home.com/faster
- Posted-and-mailed: yes
- References: <B783B69F.9A41%msc1983@mac.com>
- User-agent: Microsoft-Outlook-Express-Macintosh-Edition/5.02.2022
- Xref: archiver1.google.com comp.sys.apple2:11419
For those of who can't view the web page, here are some direct links to the
pictures:
Full picture of card
http://homepage.mac.com/msc1983/.Pictures/AppleIIGS%20pictures/DSC00013.JPG
Zoom in on corner of card
http://homepage.mac.com/msc1983/.Pictures/AppleIIGS%20pictures/DSC00015.JPG
In this picture It shows an Apple 5.25" drive connected to the card, I don't
dare turn it on like this until I know what it is for sure though.
http://homepage.mac.com/msc1983/.Pictures/AppleIIGS%20pictures/DSC00016.JPG
Matthew S. Carpentermsc1983@mac.com07/24/2001 11:35 PM
> Hello,
>
> I recently received an Apple IIGS. I'm still waiting for the monitor to
> get here, but while I'm waiting, there's this card that I wish to ask about.
> The IIGS had these two cables coming out of the side of the case, labeled 1
> and 2. They both have the same ports on them, and these ports are identical
> to the floppy disk port. If the card were two slots over I'd have enough
> room to mount the ports into a couple of the openings on the back, the two
> which are on the side opposite of the power supply, so that they aren't
> hanging out sloppily like they are now because they would fit in those
> openings perfectly.
>
> I haven't had anything plugged into the card when the IIGS has been on. But
> I think it might be a disk drive controller. on one of the corners is the
> text
> "REV B"
> "35 30C201 00"
>
> I think the "C2" in the second line is identifying a part and was written
> over a couple digits in the serial number.
>
> What I'm wondering, is what this card is and if I could move it over to Slot
> 5 and have what ever it is work so that I could mount the ports in the two
> slots to make things a little less sloppy looking...with the card in slot 7,
> there is not enough room to fit the two ports into the openings on the back
> of the case.
>
> I have put up some pictures of the card at the following web address:
>
> http://homepage.mac.com/msc1983/PhotoAlbum7.html
>
> Thank you.