[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: PRAM battery

Subject: Re: PRAM battery
From: "Mark Cummings" <NOTfigjams@primus.com.au>
Date: Wed, 4 Jul 2001 21:08:10 +1000
Newsgroups: comp.sys.apple2
Organization: CWO Customer - reports relating to abuse should be sent to abuse@cwo.net.au
References: <qS807.155995$DG1.25847743@news1.rdc1.mi.home.com> <3B4177B6.227EEE9D@ev1.net> <3b41ae34@news.iprimus.com.au> <3B41E48A.9ABC7C67@nowhere.net>
Xref: archiver1.google.com comp.sys.apple2:9956

not a bad idea, but does it fit ?
from memory the ROM-1 has fairly well spaced pads where the axial leads just
reach without much left to trim. The sockets seem to be closer spaced than
that. Or was there a second set of pads ?

Mark

<noone@nowhere.net> wrote in message 3B41E48A.9ABC7C67@nowhere.net">news:3B41E48A.9ABC7C67@nowhere.net...
> Of course my favorite is to take a Mac battery holder and place it on my
> IIgs motherboard, like the Rom3s have.
>
> Thankx,
> Ed
>
> Mark Cummings wrote:
> > 2) have someone solder it in properly. I prefer this option.

Follow-Ups:
- Re: PRAM battery
  - From: noone@nowhere.net
- Re: PRAM battery
  - From: Stephen Shaw <xstephenx@apple2.org.za>

References:
- PRAM battery
  - From: "william strutts" <wrstrutts1@home.com>
- Re: PRAM battery
  - From: Charles Richmond <richmond@ev1.net>
- Re: PRAM battery
  - From: "Mark Cummings" <NOTfigjams@primus.com.au>
- Re: PRAM battery
  - From: noone@nowhere.net

Prev by Date: Re: ROM 3 Questions
Next by Date: Re: PRAM battery
Previous by thread: Re: PRAM battery
Next by thread: Re: PRAM battery
Index(es):
- Date
- Thread