Re: Apple IIe 820-0073-B need you help

[Wayne Stewart <waynes@intergate.bc.ca>]

OZ wrote:

> I have an Apple IIe P.A.L. (color for Europe I suppose)

I'm in Canada, I've never even seen a P.A.L. IIe unfortunately.
I have a lot of info on the North American IIe but very little on the European
IIe.
I found a diagram of the PAL video circuitry. I can scan that and email it to
you.
Would a jpeg be alright and should it be a PC Zip file or a Mac Stuffit file?
I'll see what else I have on the Euro IIe.



> Between the jumper pad X7 and the edge of the mb, I have a serigraphied (in
> english?)
> SW1 (for switch).In each holes of this pseudo-switch there are  pin not
> connected but soldered.But on  components side, nothing at all.
> Because it's not my Apple, I suppose that a switch can exist, and it is break
> out from the mb.
> So is it possible that my problem is only a bad configuration between the
> monitor (phillips,
> the one sold with the Apple IIe) and this "dummy switch" for color monitor?
>