Re: Apple IIe 820-0073-B need you help

[OZ <ozimmer@attglobal.net>]

Hello,
I am a new Apple user (and an old Trs80 user), but I'm using  PC for a long time.
Jpeg or zip format is fine.
I can send you a picture of the mb (using finepix 1400) if you like for archive.

Thank you.

Wayne Stewart a �crit :

> OZ wrote:
>
> > I have an Apple IIe P.A.L. (color for Europe I suppose)
>
> I'm in Canada, I've never even seen a P.A.L. IIe unfortunately.
> I have a lot of info on the North American IIe but very little on the European
> IIe.
> I found a diagram of the PAL video circuitry. I can scan that and email it to
> you.
> Would a jpeg be alright and should it be a PC Zip file or a Mac Stuffit file?
> I'll see what else I have on the Euro IIe.
>
> > Between the jumper pad X7 and the edge of the mb, I have a serigraphied (in
> > english?)
> > SW1 (for switch).In each holes of this pseudo-switch there are  pin not
> > connected but soldered.But on  components side, nothing at all.
> > Because it's not my Apple, I suppose that a switch can exist, and it is break
> > out from the mb.
> > So is it possible that my problem is only a bad configuration between the
> > monitor (phillips,
> > the one sold with the Apple IIe) and this "dummy switch" for color monitor?
> >