Re: Connecting DUODisk to ROM3

[Rubywand <rubywand@swbell.net>]

Locutus writes ...
> 
>    Okay, I took the cover off my DUO Drive to take a look at it.. the
> model number I have is 76-0107-B which doesn't match what is said in
> the FAQ.  Does that mean I do not have to snip any thing (side note: I
> don't have a C30.  I have a C29, but it's not in the location where the
> FAQ states).
> 
>    Also R39 is already missing.  But this still doesn't answer if this
> will work in a ROM3 GS...
> 
 ....

     One model designation mentioned in the info from Steve Jensen sounds a lot
like your 76-0107-B (i.e. 676-[]107). The "B" seems to indicate a later version
of the model '107 board.

     Steve's directions specify removing C29 and C30 on model '101 and '102
boards. The only mod specified for a model '107 board is removal of R39 (which
is already missing on your board).

     It _looks_ like you can plug in your DuoDisk drive and expect it to work.
(If you notice that booting any diskette from Slot 6 via OpenApple-Contol-Reset
messes up the diskette, you might consider removing C29.)



Rubywand