Another SCSI card question ...

["John King" <joki@eskimo.com>]

I had a problem with an Apple SCSI card Rev C (not HS) and it seems to work
now after adding an external  terminating plug to the second port on the
external SyQuest ...

My question is
Should I keep the termination plug on when using this SyQuest with the Apple
*HS* SCSI card? I ask because I haven't had any problems (that I know of )
running it without a termination plug attached.  Doesn't the above problem
resolution mean I had no internal term resistors set, and that I was "lucky"
that it worked with the HS SCSI card -- OR am I wrong in my assumptions and
should take off the term pack on the SyQuest when it's running with the HS
SCSI card?