Re: Another SCSI card question ...

["David Chiu" <none@nowhere.org>]

SCSI bus should always be terminated. Not doing so is asking for trouble.

"John King" <joki@eskimo.com> wrote in message
news:8vnd6b$2mp$1@eskinews.eskimo.com...
> I had a problem with an Apple SCSI card Rev C (not HS) and it seems to
work
> now after adding an external  terminating plug to the second port on the
> external SyQuest ...
>
> My question is
> Should I keep the termination plug on when using this SyQuest with the
Apple
> *HS* SCSI card? I ask because I haven't had any problems (that I know of )
> running it without a termination plug attached.  Doesn't the above problem
> resolution mean I had no internal term resistors set, and that I was
"lucky"
> that it worked with the HS SCSI card -- OR am I wrong in my assumptions
and
> should take off the term pack on the SyQuest when it's running with the HS
> SCSI card?
>
>