Re: Need the amps on a laser 128 power adapter?

["Frank Townsend" <ftownsen@iamdigex.net>]

The diagram in the manual is the pinout for the *receptacle" not the plug,
so the pin assignments are reversed.  Thus, plug sockets 2 & 3 mate with
receptacle pins 5 & 6.  Plug 4,5,6 go to receptacle 2,3,4.  1&7 are the
same, (no connection). You get the idea (numbering convention is clockwise).


Frank

<woudy5710@my-deja.com> wrote in message news:8njkkf$1l0$1@nnrp1.deja.com...

> Upon looking at the diagram in the user manual I see that the diagram for
the
> plug is different. The book says pins 2 and 3 are the ground and pins 5
and 6
> are 17vdc.Pin 4 is the shield ground.